a old stove

[oops56]

i fired up a old stove made a pot beans
http://www.youtube.com/watch?v=c2aJgHHO ... ature=plcp

[zelph]

Good one oops!!! That's the kind of pot support they use on ships to prevent the pot from sliding off the stove

did you burn the beans? Did you get some wood pellets for the zelph stove? The only way I can get charcoal to work well is pour lots of charcoal lighter on them, step back and toss a match at them

4" twigs stacked verticle in the zelph stove makes me want to burn twigs all the day long

Do you have any videos of your exotic vintage stoves giving off some nice flames? do you have one of the Borde bomb on fire?

[zelph]

What you been doing up there in your neck of the woods?

[oops56]

well its still cold here and rain i been making some fire kits in altoids tins now making up some first aid kits in a few days make some hide glue the first sun day try my hand at bow fire making but i guess some solar cooking going to be late oh grass is ready to cut but wet and i not got a new mower yet so i got use the sick one shh dont tell any one i got a mini heet from smokeeater but not did test it yet i not like a hardware cloth pot stand much looking to make my owe some kind darn its cold in here i guess light up the stove

[sudden]

Must have missed the first post oops. Nice high tech stove you got there
Those beans made me hungry.

I fixed my old mower. Turned out to be a real easy job. Just a rubber gasket and vrooooom, back in operation. Thought I would have to scrap it but decided to see what the internet knew about sputtering mowers. Fixed it for less than $10. I'm a certified lawn mower genius now.

[oops56]

Must have missed the first post oops. Nice high tech stove you got there
Those beans made me hungry.

I fixed my old mower. Turned out to be a real easy job. Just a rubber gasket and vrooooom, back in operation. Thought I would have to scrap it but decided to see what the internet knew about sputtering mowers. Fixed it for less than $10. I'm a certified lawn mower genius now.

yup i use too fix them for me but i got lazy i think the flywheel key is bad its out time a little firing late

[sudden]

The only time that key moves is if you hit something. I had one do that years ago, I gave up trying to fix it.

[Ridgerunner]

It's a simple fix. If you sheer the key, it will not run. Y just need to remove a bunch of screws and install a new key in the key way unless you somehow damaged the key way. Then your screwed!

[oops56]

[quote="Ridgerunner"]It's a simple fix. If you sheer the key, it will not run. Y just need to remove a bunch of screws and install a new key in the key way unless you somehow damaged the key way. Then your screwed![/quote
i have extra keys i just need to male a flywheel puller i sure its the key cause i hit a pipe that's when it all started the last time i hit that pipe one other lawn mower it broke the bottom oil seal cut grass and feed it oil at same time when it got low on oil it stop running put more in a way we go it had a low oil switch to shut it down

[Ridgerunner]

Oops, seems the easy fix would be to fix the pipe so you can't run over it by putting a metal fence post next to it or removing it if it serves no purpose.