How to fine tune a penny stove

The stove creations of Oops56 and a Collection of Vintage Stoves of the Past
oops56
Posts: 1920
Joined: Wed Sep 19, 2007 11:31 am

How to fine tune a penny stove

Postby oops56 » Fri Nov 07, 2008 8:00 pm

Image
Man play with fire man get burnt

User avatar
Skidsteer
Posts: 555
Joined: Fri Aug 17, 2007 2:10 pm
Location: Leisure Acres

Re: How to fine tune a penny stove

Postby Skidsteer » Fri Nov 07, 2008 8:35 pm

Hehe.

I saw that coming. :mrgreen:
Skids

Insanity: doing the same thing over and over again and expecting different results.
Albert Einstein, (attributed)
Image

User avatar
DarenN
Posts: 2816
Joined: Wed Feb 06, 2008 11:46 am
Location: Surrey, B.C. Canada

Re: How to fine tune a penny stove

Postby DarenN » Fri Nov 07, 2008 8:37 pm

:lol: :lol: :lol: :lol:
reminded me of a comic that smashed watermelons with a sledgehammer! :mrgreen:

......
"I'd rather be happy than right." Slartibartfast

User avatar
irrationalsolutions
Posts: 1450
Joined: Thu Sep 25, 2008 5:10 am
Location: South Carolina

Re: How to fine tune a penny stove

Postby irrationalsolutions » Fri Nov 07, 2008 8:45 pm

good old Gallagher :D

oops 1 penny stove 0
“Do or do not... there is NO try.” Yoda

Luke "Whats in (out) there?" Yoda "Only what you take with you."

Luke "I can’t believe it." Yoda "That is why you Fail.”

User avatar
zelph
Posts: 15751
Joined: Tue Aug 14, 2007 1:53 pm

Re: How to fine tune a penny stove

Postby zelph » Fri Nov 07, 2008 11:00 pm

Even Abraham Lincoln was included in the tuning. He actually was Tweaked with a ballpeen.

I did not see that one coming. I have not laughed that hard in a very very long time, thanks Oops :D :D

Ok, one more time :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:

Oh!!!!! Thanks to Allen also :D

Wait till he see this one :lol: :lol: :lol:
"Nothing Ventured Nothing Gained" stove store = http://www.woodgaz-stove.com/

Allen
Posts: 510
Joined: Tue Feb 26, 2008 11:50 pm

Re: How to fine tune a penny stove

Postby Allen » Sat Nov 08, 2008 1:54 am

This is Great! :D
The Penny Stove was the perfect choice!
Thanks oops!

Cheers!

User avatar
dlarson
Site Admin
Posts: 429
Joined: Tue Jul 08, 2008 10:02 pm
Location: minnesota

Re: How to fine tune a penny stove

Postby dlarson » Sat Nov 08, 2008 5:00 am

LOL!!
"Hiking is just walking where it's O.K. to pee." -Demetri Martin

User avatar
zelph
Posts: 15751
Joined: Tue Aug 14, 2007 1:53 pm

Re: How to fine tune a penny stove

Postby zelph » Sat Nov 08, 2008 12:18 pm

Before the stove was peened, it looks like the edge of the aluminum was curled from high heat of the flames touching the edge while burning. Is the edge completely deteriorated in short order on this type of stove? This question goes out to users of the stove and makers that have tested it.
"Nothing Ventured Nothing Gained" stove store = http://www.woodgaz-stove.com/

oops56
Posts: 1920
Joined: Wed Sep 19, 2007 11:31 am

Re: How to fine tune a penny stove

Postby oops56 » Sat Nov 08, 2008 12:28 pm

zelph wrote:Before the stove was peened, it looks like the edge of the aluminum was curled from high heat of the flames touching the edge while burning. Is the edge completely deteriorated in short order on this type of stove? This question goes out to users of the stove and makers that have tested it.


Cant say adout the egde mess up on burning this one has a lot of moving miles on it junk on it. etc. may have been lit up 3 times made one more diff holes same peace of s--- :shock:
Man play with fire man get burnt

User avatar
Ridgerunner
Posts: 5256
Joined: Wed Sep 19, 2007 9:08 pm
Location: SW, Ohio
Contact:

Re: How to fine tune a penny stove

Postby Ridgerunner » Sun Nov 09, 2008 1:58 pm

zelph wrote:Before the stove was peened, it looks like the edge of the aluminum was curled from high heat of the flames touching the edge while burning. Is the edge completely deteriorated in short order on this type of stove? This question goes out to users of the stove and makers that have tested it.


I have made a bunch of penny stoves that have been very reliable. I never made one with a lip the extends that far up the side. I made a few that the lip extended just enough to roll a nice bead of JB-weld around the inner edge. That looked like one of Oops' prototypes that got the proper fine tuning it deserved. :lol: Would have been neat to have done it outside while it was burning with just a splash of fuel in it. A true "Gallagher flashback...Stovie style" :lol: :lol:

Thanks for the humor Oops. ;)
"Many of lifes failures are people who did not realize how close they were to success when they gave up".....Thomas Edison

"Live Life....Love Life....Ask More !


Return to “Oops56 Creations and Things”

Who is online

Users browsing this forum: No registered users and 1 guest